1951 Packard 200 Deluxe - Lot 202

Lot 202
Aller au lot
Estimation :
1000 - 2000 EUR
Résultats avec frais
Résultat : 1 680EUR
1951 Packard 200 Deluxe - Lot 202
1951 Packard 200 Deluxe - Châssis numéro 2462 33283 - Moteur numéro J258769 - Carte grise française - Vendu sur désignation - Sans réserve 1 000 / 2 000 € La Packard 200 était un modèle fabriqué par le constructeur américain pendant les années-modèles 1951 et 1952. Elle représentait l'entrée de gamme de la marque Packard, avec un empattement réduit par rapport aux autres modèles de la société, et équipée du moteur à 8 cylindres en ligne de 4,7 litres. La Packard 200 succéda aux modèles Packard One-Twenty et Packard One-Ten, et fut renommée Clipper pour l'année-modèle 1953. Les véhicules de la gamme Packard 200 étaient uniformément équipés de diverses caractéristiques, telles que des klaxons doubles, deux pare-soleil, des protections de pare-chocs avant et arrière, une roue de secours et un jeu de cric. Le modèle de finition Deluxe se distinguait par l'ajout d'éléments de confort supplémentaires par rapport aux modèles standards, notamment des anneaux de roue chromés et des indicateurs de direction intégrés. Le moteur standard de 4,7 litres à 8 cylindres développait une puissance de 135 chevaux. Les versions équipées de la transmission Ultramatic comme le nôtre bénéficiaient d'un taux de compression légèrement supérieur offrant ainsi une puissance accrue de 138 chevaux. Notre exemplaire sans ses clefs n'a pas démarré depuis plus de 20 ans et nécessitera une vérification complète avant de reprendre du service. L'intérieur bleu possède une superbe patine, mais devra être repris à certains endroits. L'intérieur s'associe parfaitement au bleu nuit extérieur. Fait amusant, le pilote français Jean Trevoux participera à la Carrera Panamerica sur Packard en 1951. - Chassis number 2462 33283 - Engine number J258769 - French registration  Sold by designation  Without reserve The Packard 200 was a model produced by the American manufacturer during the 1951 and 1952 model years. It represented the Packard brand's entry-level model, with a shorter wheelbase than the company's other models, and powered by a 4.7-liter in-line 8-cylinder engine. The Packard 200 succeeded the Packard One-Twenty and Packard One-Ten models, and was renamed the Clipper for the 1953 model year. The Packard 200 was introduced as part of the all-new Packard range, designed under the direction of John Reinhart. The new design marked a significant departure from the previous Packard series (22nd and 23rd) from 1948 to 1950, characterized by bubble and pontoon shapes. Known as the “High Pockets” design, Reinhart's approach was more formal than that of his predecessor. This distinctive style would endure at Packard until the end of the 1956 model year, marking the conclusion of true Packard production. Vehicles in the Packard 200 range were uniformly equipped with features such as dual horns, two sun visors, front and rear bumper guards, a spare wheel and a set of jacks. The Deluxe trim model was distinguished by the addition of extra comfort features over standard models, including chrome wheel rings and integrated direction indicators. Optional whitewall tires and full wheel covers were also available at extra cost. The standard 4.7-liter eight-cylinder engine produced 135 horsepower. Versions equipped with the Ultramatic transmission, such as ours, benefited from a slightly higher compression ratio, offering a further 138 hp. Our example without keys hasn't been started for over 20 years, and will need a complete check-up before being used again. The blue interior has a superb patina, but will need to be refinished in certain areas. The interior matches the midnight blue exterior perfectly. Fun fact: French driver Jean Trevoux took part in the Carrera Panamerica on a Packard in 1951.
Mes ordres d'achat
Informations sur la vente
Conditions de vente
Retourner au catalogue